Case 856 C AWD

CASE 856C AWD GRADER Machine - factory demo, manufactured in 2022 Patented FPT engine with Hi-eSCR2 technology with AdBlue. The CASE grader is the only grader on the market that meets the stringent Stage V emissions standards using only DOC+SCRoF (Selective Catalytic Reduction) technology as an exhaust aftertreatment system. This solution guarantees significant reductions in fuel consumption and maintenance and operating costs: • - no DPF filter means no additional fuel consumption during operation • - no DPF filter means no need for periodic replacement Drivetrain: • Engine: FPT - 6-cylinder, N67 NEF common rail diesel engine, turbocharged, intercooled, 6.7-liter, meeting the latest Stage V emissions standard; Patented Selective Catalytic Reduction system with AdBlue Power in gears 1-3: 129 kW (173 HP) according to ISO 14396/ECE R120 Power in gears 4-6: 142 kW (190 HP) according to ISO 14396/ECE R120 Torque: 850 Nm at 1,400 rpm • Transmission: Full Power Shift, enabling gear changes under load Number of forward gears: 6 Number of reverse gears: 3 Torque converter with a ratio of 1.91:1 Tractive power: 117 kN Hydraulic system: • Axial piston pump with a flow rate of 126 l/min • Closed-loop load-sensing system with a pressure of 200 bar enables very high operating precision • System capacity: 200 liters Driving system: • Hydraulic steering • Six equal-size wheels with 17.5 R25 XHA MICHELIN tires • Wet disc braking system acting on all four rear wheels • Front axle with hydraulic camber adjustment and steering linkage Axle oscillation - ± 15° Wheel tilt - ± 20.3° Frame steering - ± 28° Ground clearance - 0.55 m • Tandem rear axle: Axle oscillation - ± 15° Automatic No-Spin differential lock Slewing ring: • 360° rotation capability • Slewing ring diameter - 1.35 m • Closed slewing ring with internal lubrication of the slewing bearing, preventing contamination Electrical system and cab: • 24-volt voltage V • 90 A alternator • 2 x 100 Ah batteries CAB: • Spacious, low-profile, comfortable ROPS/FOPS cab equipped with air conditioning, LED work lights, adjustable steering column; comfortable, fully pneumatically adjustable operator's seat; doors on both sides of the cab • Reversing camera with monitor • LED headlight package: 4 in the cab + 4 working • Warning light ROOF BEACON • Reverse alarm (can be disabled) • JOYSTICK CONTROL • CASE SiteWatch telematics system with a 3-year Advanced subscription - utilizes a state-of-the-art electronic module, optionally installed on the machine, to collect and collate information from the machine and GPS satellites. Machine weight, ready to operate: 16,600 kg • Height: 3,150 mm • Length: 10,044 mm • Width: 2,555 mm Additional equipment: • Rear ripper (5 tines) with guard • Front blade with parallel kinematics and mechanical indicator • Center blade, 3.66 m wide and 0.61 m high (floating) • Compatible with 3D leveling systems (TRIMBLE, LEICA) • CENTRAL LUBRICATION PRICE: 255 000 € without tax